Turbo Sieve BTS with RFID Equipment

Permanent control in the screening process

The crushing of pharmaceutical solids is a crucial step in the process of tablet production and has a significant influence on the quality of the final product. The required particle size distribution correlates with a desired release characteristic. Therefore, the choice of the correct machine setup for the crushing process is decisive for product quality. This means that the correct sieve insert must be selected and installed for a sieving machine.

For years now, the Bohle Turbo Sieve BTS 200 has been meeting the highest standards of process reliability thanks to its modern control system with recipe and user management. The sieving process can only be started by authorised operators. However, the operator is still solely responsible for installing the appropriate sieve insert.

Sieve insert determines product result
The sieve insert has a decisive influence on the product result and must therefore be regarded as process-critical. For this reason, it must be carefully selected,” said Sales Director Tim Remmert, highlighting the priority of the work process. “In order to achieve a significantly higher level of process reliability and to avoid errors to the greatest extent possible, the BTS 200 can now be equipped with RFID (Radio Frequency Identification) technology,” explained Remmert.

The sieve inserts are equipped with unobtrusive transponders (data carriers) that clearly identify the sieve insert. Thus, a stored sieving process can only be started with the sieve insert stored in the recipe. The antenna for reading the data is plugged into the feed hopper, ensuring easy cleaning of the BTS.

Increased process monitoring and safety
The use of RFID technology has further advantages for users: Storing the operating times makes it easy to draw conclusions about possible wear and extended process times. The integration of RFID technology into the BTS control system thus increases process reliability and documents the sieve insert used in the batch report.

The following data are stored on the sieve transponder, among other things:

  • Serial number
  • Sieve design (round hole sieve, grate sieve, square hole sieve)
  • Size of perforation
  • Article number
  • Date of manufacture, first and last use
  • Operating hours

Learn more about our sieving and grinding equipment


We look forward to hearing from you!

+49 (0) 25 24 93 23-0

Go to the contact page